Suspension

Includes two bolts/nuts used to attach the idler arm to the frame for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features upgraded hardware over stock including zinc plated 10.9 grade hardware (equal in strength to...

Includes four bolts used to attach the sway bar bushings to the frame on both sides for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features zinc plated 10.9 grade hardware (equal in strength to American Grade 9). Kit...

Stock style rubber 1982-92 Camaro/Firebird sway bar end links allow your vehicle's sway bar system to work like it did when the car was new. Correct in appearance with original factory installed components. High quality reproduction from Classic...

Includes four bolt, thick washer and nut sets to attach the strut to the spindle on both sides for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features zinc plated 10.9 grade hardware (equal in strength to American Grade...

The bump stop helps to cushion your suspension and avoid extensive damage when the suspension bottoms out. Designed to fit stock front lower control arms on all 1982-92 Camaros/Firebirds. You will need a quantity of 2 per car. 

Replace rusty, cross threaded or lost bolts with the correct hardware. Grade 8 bolts and washers used for mounting the steering box to the frame on 1982-92 Camaros & Firebirds. Will not fit other years.Product Includes: 3 bolts and washers,...

Don’t reuse old rusty bolts when installing aftermarket control arms when you can replace them with new ones. This kit includes new high grade hardware for installing new lower A-Arms. Kit includes Grade 10.9 bolts, flat washers and nylon lock nuts...

Replace rusty, cross threaded or lost bolts with the correct hardware. Includes nut and washer used for securing the pitman arm to the steering box on all 1982-92 Camaros & Firebirds.Product Includes: Nut and washer only, does not include pitman arm

Don’t reuse your old rusty bolts when installing aftermarket control arms when you can replace them with new ones. This kit includes all new hardware for installing lower rear control arms in your 1982-92 Camaro or Firebird. Includes (4) 12 mm 10.9...

Detroit Speed 1982-92 Camaro/Firebird weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from 1-1/2" x 2-1/2" x .083" wall steel tubing...

Cool power steering fluid by 30 degrees on 1967-2002 Camaros/Firebirds. Easily mounts with two 1/4" bolts. Suitable for autocross or daily driving. Includes -6 fittings, you will need to make lines for the return side of the power steering plumbing...

Ready to install power steering return line for 1982-92 Camaros & Firebirds. Includes O-ring to AN adapter, 30" of Aeroquip AQP Racing hose, hose clamp and Aeroquip 90 degree 6 an fitting. Everything you need to complete return power steering line,...