Miscellaneous Drivetrain

1997-2002 Camaro/Firebird Stainless Steel Engine Oil Drain Plug with Neodymium Magnet will pull unwanted metals out of your motor oil resulting in longer engine life. According to General Motors, by using bypass filters you could get the micron...

1993-96 Camaro/Firebird Stainless Steel Engine Oil Drain Plug with Neodymium Magnet will pull unwanted metals out of your motor oil resulting in longer engine life. According to General Motors, by using bypass filters you could get the micron...

These O-ring fittings convert your metric power steering rack to - 6 AN fittings which allows you to use AN lines instead of factory style lines on your 1993-2002 Camaro or Firebird. Allows you to make your own AN lines for power steering instead of...

Cool power steering fluid by 30 degrees on 1967-2002 Camaros/Firebirds. Easily mounts with two 1/4" bolts. Suitable for autocross or daily driving. Includes -6 fittings, you will need to make lines for the return side of the power steering plumbing...

ACDelco PF46E Oil Filter for all LS1 powered 1998-2002 Camaros & Firebirds. An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human...

 Factory style billet throttle cable bracket is designed for stock OEM 1998-2002 Camaro/Firebird throttle cables (Non-TCS and TCS) and cruise control cables. Installs the same as the stock bracket except stronger and better looking with an anodized...

This is a new reproduction pair of fuse box covers and decals for 1998-2002 Camaro/Firebirds with the LS1 V8 engine, made to the OEM specs and even have the GM part number and casting number on them. Includes a pair of covers with decals for both...

GM battery hold down for 1982-2002 Camaros & Firebirds, same as original. This hold down block holds your battery in place and keeps it from moving around while driving. Product includes: battery hold down only, hardware not included.

Finish Line Factory’s high flow inline fuel filters can be used for filtering fuel before or after the fuel pump to provide maximum protection for your fuel system. These are available with 10 micron filters for post-fuel-pump fuel injected...

Two-piece aluminum line clamps secure wiring or hard line providing a finished look. Clamps include stainless steel fasteners and lock nuts or may be installed in pre-threaded holes for hard to reach areas. Package of 4. Available in 3/8 (fuel lines) or...

Finish Line Factory’s replacement stainless steel mesh fuel filter element for their high flow fuel filters. Which size filter should I get?10 micron - Used after an electric fuel pump in higher pressure applications like LS swaps100 micron - Used...

HINSON Motorsports is proud to release these protective spark plug boots made for LS engines (LS1 and LS3). These boots are designed to protect the spark plug wire and boot from damage due to the exhaust heat. They will also provide some protection to...