1967-81 Camaro/Firebird Power Steering Return Line

Ready to install power steering return line for 1967-81 Camaros & Firebirds. Includes AN adapter (O-ring or Inverted Flare), 30" of Aeroquip AQP Racing hose, hose clamp and a 90 degree 6 AN fitting. Everything you need to complete return power steering line, just cut excess off and install. 30" of hose is plenty of length for tune port, Pontiac, SBC or LS powered cars as long as the power steering pump is on the driver's side of the engine. Allows you to route the hose at a good angle to avoid knicks or other issues on power steering. Will not work for pressure side, return line only. Aeroquip's AQP racing hose is constructed from AQP elastomer, with a smooth inner bore for flexibility and special textile braid reinforcement for strength. Plus, with a temperature range of -55 to 300 degrees F and a maximum pressure rating of up to 250 psi, it'll handle power steering safely and securely.

Product includes: AN adapter, 30" of Aeroquip 6 an hose, hose clamp and 90 degree 6 an fitting

How do I know which fitting I need?
If you have your old power steering lines look at the end that connects to the steering box, O-ring fittings will have a rubber O-ring where it connects to the steering box (see pictures in the photo gallery). In 1979 GM switched to metric threads on a lot of parts including the steering box, if you still have the original steering box 1967-78 normally use inverted flare standard thread fittings. If your car has been modified by a previous owner be sure to double check. You can also remove one of the bolts holding the steering box to the frame, if it has metric threads you need metric fittings.