Hardware/Bushings

Brand new reproduction bump stop spacers for all 1993-2002 Camaros/Firebirds. These were factory installed on SS & WS6 cars and are designed to move the bump stop to prevent tire contact with the inner wheel well. These are thrown out, corroded or...

Popular performance upgrade for transmission to differential torque arm bushing for 1993-2002 Camaros & Firebirds. Polyurethane reduces wheel hop on acceleration, shuddering during braking and adds greater handling control. Made of Energy's...

Includes a pair of rear bump stops for all 1993-2002 Camaros & Firebirds. Replacement polyurethane bump stops bolt in place of damaged or worn factory bump stops using existing mounting holes.  Polyurethane will not deteriorate over time...

This is ONE bump stop for all 1993-2002 Camaro/Firebirds, you will need a quantity of 2 if replacing both sides. Direct bolt on bumpstop (some cars may require opening up of mounting holes). Bumpstops have raised area to clear the metal tab on the frame...

This kit includes a replacement upgraded lower steering column bearing along with needed parts for 1982-92 Camaros/Firebirds. The metal bearings were on Corvettes and then on other GM cars in the early '90's. By upgrading to a metal ball bearing from a...

Don’t reuse old rusty bolts when installing aftermarket control arms when you can replace them with new ones. This kit from UMI Performance includes new high grade hardware for installing new front upper A-Arms on all 1993-2002 Camaros &...

Don’t reuse your old rusty bolts when installing aftermarket control arms when you can replace them with new ones from UMI Performance. This kit includes all new hardware for installing lower rear control arms in your 1993-2002 Camaro or Firebird...

New brake caliper bolts for 1998-2002 Camaro SS & Trans Am. Higher quality than stock bolts, class 10.9 zinc plated metric flange carbon steel bolts. Features a slightly larger bolt head and stronger than stock carrier bolts. Zinc coating...

Includes four bolts used to attach the sway bar bushings to the frame on both sides for all 1993-2002 Camaros & Firebirds. All the hardware needed for one car. Kit features zinc plated 10.9 grade hardware (equal in strength to American Grade 9). Kit...