Hardware/Bushings

Proforged 1982-92 Camaro/Firebird Lower Ball Joints are built with a 0.90in longer ball stud to achieve an optimal negative camber curve – dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045...

Popular performance upgrade for transmission to differential torque arm bushing for 1982-92 Camaros & Firebirds. Polyurethane reduces wheel hop on acceleration, shuddering during braking and adds greater handling control. Made of Energy's HYPER-FLEX...

This is ONE bump stop for all 1982-92 Camaro/Firebirds, you will need a quantity of 2 if replacing both sides. Direct bolt on bumpstop (some cars may require opening up of mounting holes). Bumpstops have raised area to clear the metal tab on the frame...

Energy Suspension Polyurethane 1982-92 Camaro/Firebird Sway Bar End Links allow your vehicle's sway bar system to work at its maximum efficiency. Replaces the original, short lived and too soft rubber with rugged Energy's HYPER FLEX performance...

Includes two bolts/nuts used to attach the idler arm to the frame for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features upgraded hardware over stock including zinc plated 10.9 grade hardware (equal in strength to...

Includes four bolts used to attach the sway bar bushings to the frame on both sides for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features zinc plated 10.9 grade hardware (equal in strength to American Grade 9). Kit...

Stock style rubber 1982-92 Camaro/Firebird sway bar end links allow your vehicle's sway bar system to work like it did when the car was new. Correct in appearance with original factory installed components. High quality reproduction from Classic...

Includes four bolt, thick washer and nut sets to attach the strut to the spindle on both sides for all 1982-92 Camaros & Firebirds. All the hardware needed for one car. Kit features zinc plated 10.9 grade hardware (equal in strength to American Grade...

The bump stop helps to cushion your suspension and avoid extensive damage when the suspension bottoms out. Designed to fit stock front lower control arms on all 1982-92 Camaros/Firebirds. You will need a quantity of 2 per car. 

Replace rusty, cross threaded or lost bolts with the correct hardware. Grade 8 bolts and washers used for mounting the steering box to the frame on 1982-92 Camaros & Firebirds. Will not fit other years.Product Includes: 3 bolts and washers,...

Don’t reuse old rusty bolts when installing aftermarket control arms when you can replace them with new ones. This kit from UMI Performance includes new high grade hardware for installing new lower A-Arms. Kit includes Grade 10.9 bolts, flat...

Replace rusty, cross threaded or lost bolts with the correct hardware. Includes nut and washer used for securing the pitman arm to the steering box on all 1982-92 Camaros & Firebirds.Product Includes: Nut and washer only, does not include pitman arm